查人人中国名人网因式分解结构图:怎么安装LG的声卡驱动？
来源：百度文库 编辑：查人人中国名人网 时间：2024/04/27 19:57:26
我的声卡型号是GCR-8525B的,到LG的网站上下了相应的驱动程序,Firmware103/102的都下了,也按照说明书点操作,做到最后一步时候,它告诉我下载成功,并且弹出一个对话框:让我在新的Firmware起作用前关闭电脑.
(download has done successfully!
F/W Setting Change
you must shut down your computer before the new F/W will take effect.)
可是重新启动后,设备管理器里,多媒体音频控制器还是问号,小喇叭还不不能发音,CD-ROM里也什么都没有。
请问各位达人，尤其是用过LG的同仁们，怎么解决？
附：安装说明
1. Connect the drive as“master”by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the “master” position.
2. Download the file GCR-8525B102(XP,2000)EW.ZIP or GCR-8525B102(XP,98)EW.ZIP
to a folder of your choice.
This download includes this“Read me”text file as well as the GCR8525B102(XP,2000).EXE
or GCR8525B102(98,ME).EXE program, which will auto-update your drive’s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the 'Firmware Update' program.
6. 'Firmware Downloader' program will be displayed.
And, click 'Informaton' tab and check 'Current Device'
: You can see the drive and FW version.
If not GCR-8525B, you have to change 'current device' as GCR-8525B
by use of clicking in avaiable devices.
7. And click 'JV5' tab and you'll see the firmware;GCR8525B102.LGE next to 'F/W Filename'
8. You can click the 'Download' tab, and click it.
Firmware upgrade will be started automatically.
When the UPGRADE is complete the screen should indicate FIRMWARE UPDATE SUCCESSFUL.
And then Re-boot your PC.
The update will be complete, after you reboot your system.
以上是更新驱动,问题已经解决了
(download has done successfully!
F/W Setting Change
you must shut down your computer before the new F/W will take effect.)
可是重新启动后,设备管理器里,多媒体音频控制器还是问号,小喇叭还不不能发音,CD-ROM里也什么都没有。
请问各位达人，尤其是用过LG的同仁们，怎么解决？
附：安装说明
1. Connect the drive as“master”by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the “master” position.
2. Download the file GCR-8525B102(XP,2000)EW.ZIP or GCR-8525B102(XP,98)EW.ZIP
to a folder of your choice.
This download includes this“Read me”text file as well as the GCR8525B102(XP,2000).EXE
or GCR8525B102(98,ME).EXE program, which will auto-update your drive’s firmware.
3. Close all other programs including: screen saver, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the 'Firmware Update' program.
6. 'Firmware Downloader' program will be displayed.
And, click 'Informaton' tab and check 'Current Device'
: You can see the drive and FW version.
If not GCR-8525B, you have to change 'current device' as GCR-8525B
by use of clicking in avaiable devices.
7. And click 'JV5' tab and you'll see the firmware;GCR8525B102.LGE next to 'F/W Filename'
8. You can click the 'Download' tab, and click it.
Firmware upgrade will be started automatically.
When the UPGRADE is complete the screen should indicate FIRMWARE UPDATE SUCCESSFUL.
And then Re-boot your PC.
The update will be complete, after you reboot your system.
以上是更新驱动,问题已经解决了