长安incall系统升级:重winxp装系统时出现了问题。我在装系统方面是个菜鸟，不知是硬件的问题还是安装盘的问题。

打算安装winxp sp2 原版，我已经进行了如下操作：设置CD-ROM为优先驱动盘，安装---复制文件---重新启动。
重新启动一段时间后，出现了一个错误页面，具体内容如下：
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you’ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Avanced startup options, and then select safe mode.
Technical information:
***STOP:0×0000007E (0×c0000008,0×80585463,0×F9E481F0,0×F9E47EEC)
具体图片在：http://photo.163.com/photos/sccaicong/53340925/1413694921/
请大伙帮我看一下，这是什么问题。
成功解决可追加积分。
拜托和位了。