查人人中国名人网东莞蜂窝纸板:特急!!!翻译为英语. 有积分送!!!!
来源：百度文库 编辑：查人人中国名人网 时间：2024/05/04 07:31:12
电解加工是利用金属在外电场作用下的高速局部阳极溶解过程，实现金属成型加工的工艺。钛合金电解加工时，往往在非加工部位上存在细小的点蚀。
本课题研究的任务是对电解液进行优化，达到在一定程度上减缓钛合金电解加工过程中点蚀的目的。在本试验的电解液优选试验研究中，通过改变电解液成分、配比及加入络合剂来分析它们对钛合金电解加工表面质量的影响。
完成的主要工作如下：
1.夹具和阴极设计以及加工系统的设计；
2.绘制相应夹具和阴、阳极以及电解槽的零件图纸；
3.完成了二十八组试验并分析各参数对钛合金加工质量的影响。
实验证明：钛合金的点蚀现象与电解液成分，电流密度、加工时间密切相关。
The electrolysis processing is uses the metal to dissolve the process under outside electric field function high speed partial anode, the realization metal takes shape the processing craft. When titanium alloy electrolysis processing, often has the tiny pitting in the non- processing spot .
This topic research duty is carries on the optimization to the electrolyte, achieved slows down in the titanium alloy electrolysis processing process in the certain degree the pitting goal. In in this experimental electrolyte optimal experimental study, through the change electrolyte ingredient, the allocated proportion and joins the complexing agent to analyze them to the titanium alloy electrolysis processing surface quality influence .
Completes main work as follows:
1.Mold and negative pole design as well as processing system design ;
2.Draws up the corresponding mold and is cloudy, the anode as well as the electric tank components blueprint;
3.Completed 28 groups to experiment and to analyze various parameters to the titanium alloy processing quality influence .
The experiment proved that, The titanium alloy pitting phenomenon and the electrolyte ingredient, the current density, the process period closely are connected .