多少级的160附魔:请帮忙翻译,计算机教材.1页

来源:百度文库 编辑:查人人中国名人网 时间:2024/05/13 06:57:12
Page52:
While the equipment is under warranty,the organization will not be charged for a service.This will vary from manufacturer to manufacturer however.

Whenever a piece of equipment is repaired or serviced,the person responsible for office equipment generally notes down the details in a logbook.This helps the organisation know that the equipment is being well looked after.Let’s now look at some of the simple types of maintenance that you may be asked to undertake.

Changing toner

Installing toner cartridges on laser printers varies by brand and model.These general instructions should be used to supplement or simplidy the information in your printer manual.

1. Turn off the printer.
2. Open cover or front of printer.(You should be ale to do this easily,without tools.)
3. Remove the existing toner cartridge y pulling its handle or top.Carefully lift it out or up toward you.
4. Save the existing toner cartridge for recycling or refilling.
5. Remove the new toner cartridge from its plastic bag.Use scissors if necessary.
6. Gently shake cartridge from side to side.
7. Remove tape from bottom of cartridge.
8. Put new cartridge in printer.You might need to push,but you shouldn’t need to force it.
9. Close the printer cover.
10. Turn on printer.
11. Print a test page. If toner smears,repeat test page until it prints cleanly.

Clearing Printer James
All printers have 3 handling areas:
1. Input Tray Area
2. Top Cover Area
3. Output Area

A jam can occur in any of these 3 areas.If the printer is reporting a paper jam,shutdown the printer and be sure to check all three areas for the problem page.To clear the jam ,you just have to follow the paper’s path through the printer.

第52页
如果设备被授权了的话,(使用此设备的)机构就不会被收取服务费用.然而这也要看不同的制造厂商而定.

无论何时, 只要一台设备被要求检修或服务,负责这台办公设备的人通常会在译本日志上记录下这次服务的详细过程.

这对让厂商知道他们的设备正被良好的照看着很有帮助.现在我们来看看你可能被要求承诺的几个常见类型的维修.

更换墨盒

在激光打印机上安装墨盒颜料盒的方法根据品牌和型号的不同会有所变化.这些常规的操作指南应该被用来补充或精简你打印机说明书上的信息.

1.关掉打印机
2.打开打印机的盖子或前面.(你应该可以不用工具就可以轻松的完成.)
3.通过拔它的把手或者顶部来移除原来的墨盒颜料盒.小心的将它朝你的方向提出或提上来.
4.保存原来墨盒的颜料盒用来再回收或者重新添装.
5.将新墨盒的颜料盒从塑料带中取出.必要的话可以用剪刀.
6.轻轻的将颜料盒来回(左右)晃动一下.
7.将颜料盒底部的胶带取下。
8.将新的颜料盒装进打印机.你可能需要推一下它,但是不要强行推进.
9.关上打印机的盖子.
10.启动打印机.
11.打印一张纸来实验一下.如果打出来的字很模糊,重复打印直到可以清晰的打印.

清理打印机的堵塞
所有的打印机都有3个操作区:
1.输入盘区域
2.顶部的盖子
3.输出部分

堵塞可能在上诉区域任一地方发生.如果打印机报告有纸张堵塞,关闭打印机并确认检查所有上诉区域来查找问题纸张的原因.在清理堵塞时,你必须遵循纸张通过打印机的路径.

大功告成~
如果你觉得可以希望你可以在6月8号早10点之前确认 谢谢~

Page52: 当设备是在保单之下, 组织不会收费对于service.This 将变化从制造商到制造商然而。

每当设备被修理或为服务, 人负责对办公设备一般注意在细节下在组织知道的logbook.This 帮助设备是很好看的after.Let's 现在看您可以请求承担的一些简单的类型维护。

改变的调色剂

安装墨粉盒在激光打印机变化由品牌并且model.These 一般指示应该使用补充或simplidy 信息在您的打印机指南里。

1. 关闭打印机。2. 打开盖子或printer.(You 前线应该是强麦酒容易地做这, 没有工具。) 3. 去除现有的墨粉盒y 拔出它的把柄或top.Carefully 推力它或上升往您。4. 之外现有的墨粉盒为回收或再装满。5. 取消新调色剂