沙漠军靴哪个牌子好:不会翻译

o define the parameters of your conditioning system,you will need to gather data from your system. First, collect a sample of the mash feed prior to entering the conditioner. From this sample, measure the moisture content and temperature of the feed.
Then, collect a sample of the mash during an operating pellet run at the discharge of the conditioner. Measure the temperature and moisture content of this sample. Then, begin increasing the steam added to the mash slowly until you experience roll slip. As soon as you have roll slip, collect a sample of the mash feed between the conditioner and the pellet mill. Measure the temperature and moisture content of the sample.
From these data, you can calculate how much moisture and temperature you have added to the mash feed, what the moisture limit of the pelleting application is and what the relationship between heat addition and moisture gain is in your pelleting system.
Please be cautioned that many factors affect these tests, and the results will vary with different formulas, formula changes, varying ambient conditions (temperature and relative humidity), ingredient variances, steam condition variances, throughput rates, the condition of the die and rolls and all conditions that affect pelleting in general.
Because of this, you will want to collect data over many runs at different seasons of the year and different times of the day on many or all of your rations. As you gather more data. they will be more accurate and representative. From this, you may be able to develop parameters specific to certain rations or ration types. Depending on your geographical area, you may develop two to three sets of seasonal parameters or even parameters for day and night operations. These data will also help you analyze how well your mash is prepared for conditioning.
A sample calculation is shown in the box.