自制从油桶里抽油器:我进入不了windows了, 怎样设置从光驱启动?很老的机了.
来源:百度文库 编辑:查人人中国名人网 时间:2024/05/06 09:07:13
按del后就进入这些: Main advanced power boot exit
MAIN下:
System time
System date
Legacy diskette a
Legacy diskette b [None]
Floppy 3 mode support [disabled]
有disabled enabled两个供选择
Primary master [Disabled]
Primary slave [Maxtor 6e040l0]
Secondary master [Auto]
Secondary slave [ATAPI-CD ROM-DRIVE-52MA]
Key board features [ON]
advanced 下:
Current cpu internal frequency 566 hz
Cpu internal frequency [Manual]
Cpu frequency multiple [8.5x]
Fsb/sdram freq (mhz) [66/66]
Cpu level 1cache [enabled]
Cpu level 2cache [enabled]
Cpu level 2cache ecc check
Bios update [enabled]
Ps/2 mouse function control [Auto]
Usb legacy support [Auto]
Os/2 onboard memory> 64m [disabled]
Chip configuration
i/o device configuration
pci configuration
shadow configuration
boot 下
1. removable device [legacy floppy]
2. ipe hard drive [maxtor 6e040l0]
3. atapi cd-rom [atapi-cd rom-drve-5]
4. other boot device [int18 device(netrork)]
plug & play o/s [ON]
boot virus detection [ENABLED]
quick power on self test [ENABLED]
boot up floppy seek [ENABLED]
full screen logo. [ENABLED]
我没有的找到: first boot / second boot
有哪位知道怎么设置我的电脑(越详细越好),我想安装windows xp但进入不了windows.
一开机就有显示'floppy disk(s) fail (40)'
1. 进入原windows显示: 因以下文件的损坏或者丢失,windows无法启动,<windows root>\system 32\hal.dll 请重新安装以上文件的拷贝.
2.进入安装程序显示: 安装程序无法验证C:驱动器,计算机内存不足,无法检查C:驱动器,或者windows xp CD有损坏文件.要继续请按enter.
还是不行. 安装不了.气死我了!!!!!
另: 安装光盘在其他电脑上可以使用.
有哪位试过,把windows安装在移动硬盘上,然后再把移动硬盘用USB线接入需安装的电脑,能进入吗?
大家帮帮忙,我的英文很烂,很多看不懂!!!
MAIN下:
System time
System date
Legacy diskette a
Legacy diskette b [None]
Floppy 3 mode support [disabled]
有disabled enabled两个供选择
Primary master [Disabled]
Primary slave [Maxtor 6e040l0]
Secondary master [Auto]
Secondary slave [ATAPI-CD ROM-DRIVE-52MA]
Key board features [ON]
advanced 下:
Current cpu internal frequency 566 hz
Cpu internal frequency [Manual]
Cpu frequency multiple [8.5x]
Fsb/sdram freq (mhz) [66/66]
Cpu level 1cache [enabled]
Cpu level 2cache [enabled]
Cpu level 2cache ecc check
Bios update [enabled]
Ps/2 mouse function control [Auto]
Usb legacy support [Auto]
Os/2 onboard memory> 64m [disabled]
Chip configuration
i/o device configuration
pci configuration
shadow configuration
boot 下
1. removable device [legacy floppy]
2. ipe hard drive [maxtor 6e040l0]
3. atapi cd-rom [atapi-cd rom-drve-5]
4. other boot device [int18 device(netrork)]
plug & play o/s [ON]
boot virus detection [ENABLED]
quick power on self test [ENABLED]
boot up floppy seek [ENABLED]
full screen logo. [ENABLED]
我没有的找到: first boot / second boot
有哪位知道怎么设置我的电脑(越详细越好),我想安装windows xp但进入不了windows.
一开机就有显示'floppy disk(s) fail (40)'
1. 进入原windows显示: 因以下文件的损坏或者丢失,windows无法启动,<windows root>\system 32\hal.dll 请重新安装以上文件的拷贝.
2.进入安装程序显示: 安装程序无法验证C:驱动器,计算机内存不足,无法检查C:驱动器,或者windows xp CD有损坏文件.要继续请按enter.
还是不行. 安装不了.气死我了!!!!!
另: 安装光盘在其他电脑上可以使用.
有哪位试过,把windows安装在移动硬盘上,然后再把移动硬盘用USB线接入需安装的电脑,能进入吗?
大家帮帮忙,我的英文很烂,很多看不懂!!!
在BOOT选单下把1、2、4三项都设为“disabled”即关闭这三项,只留第3的CD-ROM,这样保存后再试试睇能不能用从光盘启动。(再说一下,在我的经验中出现过多次同一张光盘在别人的机可用,但到我的机就用不了,或者反过来)