查人人中国名人网书法空间美学:我的系统出毛病了,大家帮帮我啊
来源：百度文库 编辑：查人人中国名人网 时间：2024/04/28 02:10:08
我昨天移动了一下电脑，重新布置了一下上网线，开机都是好的，我使用的是电信的ADSL，我一打开MODEN电脑就重启了，然后就是正常的读进度条，但是出现蓝屏，显示：
A problem has been detected and windows has been shut down to prevent damage to your computer .If this is the fisrt time you've seen this stop error screen ,restart your computer.If this screen appears again,follow there steps:
Check to be sure your have adequate disk space,If a driver is identiffed in the stop message,disable the driver or check with the manufacturer for driver updates.Try changing video adapters.
Check with your hardware vendorforang BIOS updates.Disable BIOS memery options such as caching or shadowing.If your need to use Sofa Mode to remove or disable components ,restart your computer ,prees F8 to select Advanced Startup optinons ,and then select Safe Mode Technical informations:
STOP:
0x0000007E(0x00000005,0xF70534D0,0xFA2C2FEC,0xFA2C2CEC)
我准备进入安全模式，但是进不去，请各位大虾帮忙了.
A problem has been detected and windows has been shut down to prevent damage to your computer .If this is the fisrt time you've seen this stop error screen ,restart your computer.If this screen appears again,follow there steps:
Check to be sure your have adequate disk space,If a driver is identiffed in the stop message,disable the driver or check with the manufacturer for driver updates.Try changing video adapters.
Check with your hardware vendorforang BIOS updates.Disable BIOS memery options such as caching or shadowing.If your need to use Sofa Mode to remove or disable components ,restart your computer ,prees F8 to select Advanced Startup optinons ,and then select Safe Mode Technical informations:
STOP:
0x0000007E(0x00000005,0xF70534D0,0xFA2C2FEC,0xFA2C2CEC)
我准备进入安全模式，但是进不去，请各位大虾帮忙了.
拔掉网卡重新启动。
你电脑是系统在启动过程中驱动出现差错,要进入安全模式只要在电脑进入系统启动初期按F5键,即可进入高级菜单选项,跟据提示进入安全模式,然后将系统还原到上一次正常启动的模式,重新启动电脑,OK
连安全模式都不能进吗?
建议楼主把机箱拆开,把内存条等硬件插好,再试试,如果能进安全模式的话,请按照下列步骤操作：
1. 开机时按F8以安全模式重新启动计算机。
2. 单击“开始”，单击“运行”，键入 regedit，然后单击“确定”。
3. 找到并单击以下注册表项：
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Intelppm
4. 在右侧窗格中，右键单击“开始”项，然后单击“修改”。
5. 在“数值数据”框中，键入 4，然后单击“确定”。
6. 退出注册表编辑器。
7. 重新启动计算机。
进入BIOS，读取硬件的初始化设置
load fail-safe option